|
Available Models
Please refer to section ‘Know The Right Size’ for criteria for choosing the correct sleeve from the models listed below:
Standard Sleeve
This sleeve design represents the industry’s most standard design. Standard length is 60mm. Sleeves come with a clear outer tube for viewing the color of the fiber. Diameter after shrinking 3.0mm CACT approved. Also available in 45mm and 8 colors*Modified version of standard sleeve with diameter of 2.8mm is also available it is designed to fit in trays of PLP, Multilink and few other manufacturers.
Slim Sleeve
Available in clear these sleeves use reduced diameter components for a smaller finished product. The smaller diameter allows users to fit more splices in existing splice trays. Diameter after shrinking 2.4mm.Length available 60mm, 45mm, 40mm.
Mini Sleeve
This sleeve will recover to 2.1 mm and is available in clear. Standard lengths available; 60mm, 40mm.
Micro Sleeve
Used where space is very limited especially in couplers and ultra high density trays. Strength member used 0.8mm hard stainless steel makes it easy to handle for its size.Recovered dia. 1.5mm. Length 35mm, 25mm.
Modified Micro
Slimmest sleeves available in the market. Recovered dia. 1.2 mm. Length 35mm, 25mm.
Ribbon Sleeves
Suitable for 4 to 12 fiber ribbons. High mechanical strength ceramic strength member. Standard Length 40mm.
| Part Number |
Fiber Type |
Sleeve Length |
Strength Member Type |
Post Shrinking Diameter |
Nomenclature |
| PSPSSTD60S |
Single Up-to 1000 microns |
61mm |
Stainless Steel * Dia.1.4mm |
3.0mm |
Standard 60 |
| PSPSSTD45S |
Single Up-to 1000 microns |
45mm |
Stainless Steel Dia 1.4mm |
3.0mm |
Standard 45 |
| PSPSMSTD60S |
Single Up-to 1000 microns |
61mm |
Stainless Steel Dia. 1.4mm |
2.8mm |
Modified standard 60 |
| PSPSMSTD45S |
Single Up-to 1000 microns |
45mm |
Stainless Steel Dia. 1.4mm |
2.8mm |
Modified standard 45 |
| PSPSSLM60S * |
Single Up-to 1000 microns |
61mm |
Stainless Steel Dia. 1.1mm |
2.4mm |
Slim 60 |
| PSPSSLM45S * |
Single Up-to 1000 microns |
45mm |
Stainless Steel Dia. 1.1mm |
2.4mm |
Slim 45 |
| PSPSSLM40S * |
Single Up-to 1000 microns |
40mm |
Stainless Steel Dia. 1.1mm |
2.4mm |
Slim 40 |
| PSPSSLM35S * |
Single Up-to 1000 microns |
35mm |
Stainless Steel Dia. 1.1mm |
2.4mm |
Slim 35 |
| PSPSSLM25S * |
Single Up-to 1000 microns |
25mm |
Stainless Steel Dia.1.1mm |
2.4mm |
Slim 25 |
| PSPSMN60S |
Single Up-to 1000 microns |
61mm |
Stainless Steel Dia. 1.0mm |
2.1mm |
Mini 60 |
| PSPSMN40S |
Single Up-to 1000 microns |
40mm |
Stainless Steel Dia. 1.0mm |
2.1mm |
Mini 40 |
| PSPSMCRO40S * |
Single Up-to 400 microns |
40mm |
Stainless Steel 0.8mm |
1.5mm |
Micro 40 |
| PSPSMCRO35S * |
Single Up-to 400 microns |
35mm |
Stainless Steel 0.8mm |
1.5mm |
Micro 35 |
| PSPSMCRO25S * |
Single Up-to 400 microns |
25mm |
Stainless Steel 0.8mm |
1.5mm |
Micro 25 |
| PSPSMMCR35S * |
Single Up-to 400 microns |
35mm |
Stainless Steel 0.5mm |
1.2mm |
Modified Micro 35 |
| PSPSMMCR25S * |
Single Up-to 400 microns |
25mm |
Stainless Steel 0.5mm |
1.2mm |
Modified Micro 25 |
| PSPSSTD60D |
Single Up-to 1000 microns |
61mm |
Dielectric FR 1.5mm |
3.0mm |
Dielectric standard 60 |
| PSPSMCRO35D * |
Single Up-to 400 microns |
35mm |
Dielectric FR 0.8mm |
1.5mm |
Dielectric Micro 35 |
| PSPSRBNW440 |
4fiber ribbon |
40mm |
High Alumina ceramic 3.0mm half round White |
3.5 mm |
4F Ribbon |
| PSPSRBNW1240 |
12fiber ribbon |
40mm |
High Alumina ceramic 4.0mm half round White |
5.0*4.5mm |
12F Ribbon |
| PSPSRBNC1240 |
12fiber ribbon |
40mm |
Clear Quartz/Borosilicate
4.0mm half round |
5.0*4.5mm |
12F ribbon CLEAR |
|
